Capacities ranging from 2 to 7 cfm, ultimate vacuum 25.5 inHgV. Compact, easy to install. Low noise level and corrosion-resistant rotors, hose connection, and exhaust silencer as standard.
Capacities from 8 to 30 cfm, ultimate vacuum of 25.5 inHgV. Sound cover reduces noise level, enhances cooling and protects operators from touching hot surfaces. Comes with built-in suction filters and vacuum valves and low vibration, easy to operate, install and service.
Capacities from 39 to 91 cfm, ultimate vacuum of 25.5 inHgV. Featuring bearings on both sides of the rotor, and flange mounted motor with bolt coupling. High efficiency and low noise operation. Easy to operate and service.
Capacities from 2 to 7 cfm, pressure up to 14.5 psig. Compact design, easy to build into machines, with low noise level. Hose connector, inlet silencer and pressure relief valve fitted as standard.
Capacities from 36 to 91 cfm, pressure up to 22 psig for continuous operation and up to 32 psig for intermittent operation. Featuring bearings on both sides of the rotor, and flange mounted motor with bolt coupling. High efficiency and low noise operation. Easy to operate and service.
Capacities from 28 to 95 cfm, vacuum up to 18 inHgV, pressure up to 10 psig. High efficiency and low noise level. Sound cover allows a ducted cooling air outlet. Easy to operate and service.
Capacities from 6 to 11 cfm (10 to 24 m³/h), reaching an ultimate vacuum of up to 29.86 inHg (gauge) [2 mbar (abs.)]. This needs little space thanks to its overhung rotor design and integral motor. Standard models come with a fine mesh filter, vacuum non-return valve and oil separator. This pump is ideal for any environment as it is quiet running.
Capacities ranging from 12 to 16 cfm (20 to 26.5 m³/h), and an ultimate vacuum of 29.86 inHg (gauge) [2 mbar (abs.)]. Designed especially for installation into small vacuum packaging machines. Features a flange mounted motor, bearings on both sides of the rotor and air cooling. Fitted with a fine mesh filter, vacuum non-return valve and oil separator.
Capacities ranging from 15 to 29 cfm (25 to 30 m³/h); V-VCE at 29.62 inHg (gauge) [10 mbar (abs.)]; flange mounted motor, bearings on both sides of the rotor, air cooling. Fitted as standard with fine mesh filter, vacuum non-return valve, gas ballast valve and oil separator.
Capacities ranging from 30 to 903 cfm (40 to 1,535 m³/h), and an ultimate vacuum of 29.91 inHg (gauge) [0.5 mbar (abs.)]. Flange mounted motor, bearings on both sides of the rotor, oil/air heat exchanger. All models include aluminum alloy vanes, back pressure gauge, gas ballast valve(s), non-return valve and easy-access replaceable oil separators. Sizes of 400 m³/h and above include 5 micron paper inlet filter(s) and double-walled cylinder construction.
